The Dragon rail platform has been based and designed to primarily fit the ASG Dan Wesson 715 revolver with the 2.5″ barrel, however it will still fit the 6″ version.
Along the top rail, you have several slots for 20mm picatinny rail attachments, a cut out at the front to resecure your front sight and and oval shaped gap to adjust the hop up. The top rail is fixed to the pistol and the platform with two supplied M3 screws.
The bottom rail is also secured with two supplied M3 screws which also help with fully securing the platform to the underside of the revolver. You may notice there are two blank holes either side of the platform, these are so you can attach extra rails to the sides if you so wish, which are available seperately.
The system is mounted at four seperate points; one screw replaces the screw in the rear sight on the top rail, another screw affixes the front half of the top rail to the platform and offers resitance onto the barrel and the two screws on the bottom rail can be tightened (lightly) to the underside of the out barrel giving the platform a secure fixture at several points. Each Dragon platform is test fitted before leaving.
- Fits 2.5″ and 6″ barrel versions
- Test fitted
- Top and bottom rails included
- Extra side rails available
- Tight, secure mounting
- Allows access to hop up
- Printed from PLA
- Solid, three piece construction
- Pistol not included